| T O P I C R E V I E W |
| beachcat | Reposting this in the right section with correct dimensions. This is to address the cosmetic issue of deteriorating grease boots on our VSLs. It involves taking an 1 1/2" ID piece of ABS pipe, drilling a hole in the center of it and cutting a slot along the length of it, through the hole. The piece can then be painted silver or whatever.It then slides onto the VSL and snaps into place. My part dimensions are: 1 1/2" ID ABS pipe
cut to 1 1/2' long
drilled a 7/16" hole in the center
cut a 1/4" wide slot along the length of it and through the hole. 
To make it safer, I cut the slot in a longer piece of pipe on the table saw. and then cut the 1/12" sections off with a chop saw. Of course I drilled the holes first. I feel like Harold in the Keys now  This message has been edited by beachcat on 04-13-2013 at 11:16 AM |
| TIGRKAT | Great solution Ross....thanks |
| DrillinU | Roger, beautiful work.
You know I have two left legs as my arms, would it be ok if you ship me a set, and I can send some money for them? quote:
Originally posted by beachcat:
Reposting this in the right section with correct dimensions.This is to address the cosmetic issue of deteriorating grease boots on our VSLs. It involves taking an 1 1/2" ID piece of ABS pipe, drilling a hole in the center of it and cutting a slot along the length of it, through the hole. The piece can then be painted silver or whatever.It then slides onto the VSL and snaps into place. My part dimensions are: 1 1/2" ID ABS pipe
cut to 1 1/2' long
drilled a 7/16" hole in the center
cut a 1/4" wide slot along the length of it and through the hole.
To make it safer, I cut the slot in a longer piece of pipe on the table saw. and then cut the 1/12" sections off with a chop saw. Of course I drilled the holes first. I feel like Harold in the Keys now
|
| beachcat | quote:
Originally posted by DrillinU:
Roger, beautiful work.
You know I have two left legs as my arms, would it be ok if you ship me a set, and I can send some money for them?
That really wasn't my intent. It's a DIY mod. But if you don't mind waiting, perhaps a long time, I might make a few sets and send them out unpainted for testing and critique. |
| DrillinU | I don't mind the wait
quote:
Originally posted by beachcat:
That really wasn't my intent. It's a DIY mod. But if you don't mind waiting, perhaps a long time, I might make a few sets and send them out unpainted for testing and critique.
|
| quincy | Very cleaver and creative work!! I love it. Make them and people will buy them! I know I'll take a pair. |
| beachcat | quote:
Originally posted by quincy:
Very cleaver and creative work!! I love it. Make them and people will buy them! I know I'll take a pair.
I will consider it if there is more interest. |
| Orange Power | Did you remove the rubber and re-grease or slide over the old rubber? |
| beachcat | quote:
Originally posted by Orange Power:
Did you remove the rubber and re-grease or slide over the old rubber?
I slid them over the old rubber. |
| HappyKat | Let me jnow when available and I will take two also. Already had a snow blower accident and took off two tips of fingers. So I would also buy them. |
| spoons | Or you can by after market replacement ones:
http://www.prowleronline.com/ubb/Forum21/HTML/000060.html |
| spoons | Click link below to pay online for replacement Vertical Stabilizer Links. Click here to pay for VSL
email me at b_richardson@yahoo.com if you would like to send me a check.
|
| mslc10 | spoons...are these still available? bump for newbies..... |
